EMERGENCY RESPONSE: Call 0408 449 675
Air Conditioning · Trust/ 9 min read

How to Choose an Air Conditioning Installer (and What to Check)

The installer matters more than the badge on the box. Here are the licences, documents and questions that separate a professional installation from an expensive lesson.

Servicing Newcastle, Lake Macquarie, Maitland, the Hunter Valley and Port Stephens

By Sebastian Chum · Published 16 November 2026 · Updated November 2026

A licensed technician completing an air conditioning installation
Licensing, insurance and a written scope are the three basics.
ARC Tick Certified — refrigerant handling

Licensed & certified technicians

ARC Refrigerant Licence

AU 39843

Contractor Licence

209362C

01

Overview

Air conditioning installation involves refrigerant handling, electrical work, pipework, drainage and structural fixing. In Australia, refrigerant handling is licensed work, electrical work is separately licensed, and the manufacturer warranty depends on the system being installed to specification. That means choosing an installer is not like choosing a painter: the wrong choice can void a warranty, create an insurance problem and cost more to fix than the original job.

The good news is that the checks are quick. A legitimate installer can produce a refrigerant handling licence, an electrical licence or a licensed electrical contractor, a certificate of insurance, and a written quote that names the equipment and the scope. They will also be comfortable being asked who attends warranty calls and how they document commissioning.

This guide sets out what to verify, the questions worth asking before you sign, how to compare quotes fairly, and the red flags that suggest a job will not end well. It applies equally to a single split in a home and a multi-unit commercial installation.

A technician servicing an installed system
Ask who answers the phone when something fails in year three.
02

The problem

These are the patterns behind most installation regrets:

  • Choosing purely on price, without comparing what is included in each quote.
  • No licence check. Refrigerant handling and electrical work are regulated, and unlicensed work can void warranty and complicate insurance.
  • Quotes with no model numbers, so you cannot confirm what is being installed or compare it with another quote.
  • No written scope covering pipe runs, electrical work, removal of the old unit and commissioning.
  • No insurance. If something is damaged or someone is injured on your property, the consequences sit with you.
  • No aftercare: the installer who sold the job is not the one who answers the phone in year three.
  • Pressure to decide immediately, or a discount that expires today. Urgency is a sales technique, not a service.

None of these require technical knowledge to check. They require asking for documents and reading the quote.

03

Understanding it

Five things to verify before you commit.

Licensing, and what each licence covers

Refrigerant handling requires a refrigerant handling licence, and electrical work requires an electrical licence held by the person doing it or a licensed electrical contractor. A company can hold the relevant contractor licences and employ licensed technicians. Ask for the licence numbers and check them with the relevant regulator. This is not a formality: unlicensed refrigerant work is unsafe, unlawful and can void the manufacturer warranty on a new unit.

Insurance and workplace arrangements

Ask for a certificate of currency for public liability, and for workers compensation arrangements if people will be working on your property. A business that cannot produce these is not insured for the work it is quoting, which means the risk transfers to you. This matters most for work at height, on roofs, or in commercial premises where third parties are present.

A written quote with a real scope

The quote should name the indoor and outdoor models, state the calculated capacity, list the included pipe run, confirm whether electrical work and switchboard upgrades are included, state whether the old unit is removed, and say what documentation is provided at completion. It should also state the warranty terms on both the equipment and the workmanship. If any of those are missing, the quote is not comparable with one that has them.

Commissioning and handover

A professional installation ends with commissioning: pressures, temperatures, airflow, drainage test, controller setup and a walkthrough. You should receive a record. Ask what the handover includes, and whether you will get the manufacturer warranty registered in your name. This is also the point where you learn how to use the zones, timers and filters, which affects running cost for years.

Aftercare and the local question

Ask who attends warranty calls, how quickly they respond in peak season, and whether they service what they install. A local business that services its own installations has a reason to install well, and it knows the history of your system when something goes wrong. This is the difference between a transaction and a relationship, and it shows up in year three rather than year one.

How to read a quote line by line

Start with the equipment. Are the indoor and outdoor model numbers listed, and do they match between quotes? Is the capacity stated, and is there a heat-load calculation behind it? Next, the installation: what pipe run is included, and what is charged beyond it? Is the outdoor unit position specified? Then the electrical: is a dedicated circuit included, is a switchboard upgrade included, and is the electrician licensed? Then the extras that are easy to omit: removal and disposal of the old unit, condensate drainage and any pump, making good after penetrations, and commissioning documentation. Finally, the commercial terms: deposit, payment timing, workmanship warranty period and what happens if the installation needs a return visit. A quote that answers all of that in a page is a professional document, and it is far easier to compare than four totals.

Red flags worth walking away from

Some signals are worth acting on before money changes hands. No licence numbers, or reluctance to provide them. No insurance certificate. A quote with no model numbers or a vague scope. A price that changes when you ask for the scope in writing. Pressure to sign today for a discount that will not exist tomorrow. A promise that no electrical work will be needed without anyone looking at the switchboard. Cash-only arrangements with no invoice, which leave you without warranty evidence. And an installer who will not put the workmanship warranty in writing. None of these guarantee a bad job, but together they describe a business that is not set up to stand behind its work. There are enough good installers in the Hunter that you never need to accept those terms.

What installation day should look like

A well-run installation day tells you a lot about the business. The technicians arrive when they said they would, or call if they are delayed. Floors and furniture are protected before work starts. The outdoor unit position is confirmed with you rather than decided unilaterally, and the pipe route is explained. Penetrations are sealed, the pipework is insulated properly rather than left bare, the drain is tested and the switchboard work is done by a licensed electrician. At the end, the system is run in both modes, temperatures and pressures are checked, the controller is set up and explained, and you are shown the filters and told how often to clean them. You leave with a commissioning record and warranty information. If any of that is missing, ask why before you pay the balance.

A cheap installation is only cheap until the warranty claim, the electrical upgrade or the second installer has to fix what the first one did.

04

The solution

Six questions that separate the professionals from the rest.

  1. 01

    Can I see your licences and insurance?

    A professional answers immediately and provides numbers and a certificate of currency. Hesitation here is the clearest red flag in the industry.

  2. 02

    What capacity did you calculate, and how?

    The answer should reference a heat-load calculation covering room size, glazing, orientation, insulation and occupancy, not a rule of thumb per square metre. This tells you whether the unit will actually work in your room.

  3. 03

    What exactly is included?

    Pipe run, electrical, switchboard work, removal and disposal, condensate drainage, commissioning and warranty registration. Get it in writing, then compare quotes line by line rather than on the total.

  4. 04

    Who does the electrical work?

    It should be a licensed electrician, and the answer should be clear about whether it is in-house or subcontracted and whether it is included in the price. Vague answers here usually mean an extra invoice later.

  5. 05

    What happens if something fails?

    Ask about the workmanship warranty period, how warranty calls are handled in peak season, and whether they service the system afterwards. A written answer is better than a verbal promise.

  6. 06

    Can I see a recent installation?

    Photos, references or a local job you can look at. Installation quality shows in the details: neat pipework, proper insulation, tidy drainage, secure fixings and a labelled switchboard.

You are not looking for the cheapest or the most expensive. You are looking for the one who answers these six questions without hesitation and puts the answers in writing.

A professionally installed ducted system
Neat pipework, insulation and drainage are visible signs of quality.
05

In conclusion

Installation quality is invisible once the unit is on the wall, which is why the checks have to happen before you sign. Licensing, insurance, a written scope and commissioning records are the four basics.

Ask the six questions, compare scopes rather than totals, and prefer an installer who will still answer the phone in year three. That decision affects the system's performance and your costs far more than the brand on the box.

Need this sorted?

Get a clear quote or book a service with Polar.

FAQ

Frequently asked questions

A refrigerant handling licence for the refrigerant work, and electrical work must be done by a licensed electrician or licensed electrical contractor. Ask for the numbers and check them with the relevant regulator.

Written by

Sebastian Chum

Content & SEO Lead, Polar Refrigeration & Air Conditioning

Sebastian writes Polar's refrigeration and air conditioning guides, working with our licensed technicians to turn site experience into practical advice for Hunter homes and businesses.

Published 16 November 2026 · Updated November 2026

Disclaimer: General information only. This guide is written for conditions in Newcastle, the Hunter and NSW, and it does not replace an on-site assessment, a written quote, manufacturer instructions, or legal, food-safety or strata advice. Pricing figures are indicative and confirmed only in a written quote. Refrigerant and electrical work must be carried out by licensed technicians.

Want a quote you can compare?

Book an assessment and receive a written fixed-price quote with the scope spelled out.